:	May 25, 2007

.

Remove the RH halfshaft.

.

Remove the axle tube.   Remove the bolt from the bushing.   Remove the 4 bolts.   Rotate and remove the axle tube.   Early models: Remove and discard the O-ring seal.   Later models: Remove the sealant.

.

Install the axle tube.   Clean the component mating faces.   Early models: Install a new O-ring seal.   Later models: Apply sealant to the mating face.   Tighten the 4 axle tube bolts to 50 Nm (37 lb.ft).   Tighten the axle tube bushing bolt to 63 Nm (46 lb.ft).

.

Install the RH halfshaft.